Products

Firebricks and tiles

Stores heat and protects against fire. A fire brick is a block of refractory ceramic material used in lining furnaces, kilns, fireboxes, and fireplaces. A refractory brick is designed mainly to withstand high heat, but should also usually have a low thermal conductivity to save energy. Usually dense refractory bricks are used in applications with extreme mechanical, chemical, or thermal stresses, such as the inside of a wood-fired kiln or a furnace, which is subject to abrasion from wood, fluxing from ash or slag, and high temperatures. Dense refractory bricks have a high thermal mass which is sometimes a useful property in that they will retain heat e.g. in a pizza oven after the fire has been taken out. A wide range of Fire bricks and tiles is available for all needs.

W

Low Duty

  • 8.25″ x 4″ x 1.25″
  • 8.25″ x 4″ x 2.5″
  • 9″ x 4″ x 2.25″
  • 9″ x 4.5″ x 1.25
  • 9″ x 4.5″ x 2″
  • 9″ x 4.5″ x 2.5″
W

Medium Duty

  • 9″ x 4.5″ x 1.25″
  • 9″ x 4.5″ x 2.5″
W

High Duty

  • 9″ x 4.5″ x 2.5″
  • 9″ x 4.5″ x 3″
W

Super Duty

  • 9″ x 4.5″ x 1.25″
  • 9″ x 4.5″ x 2″
  • 9″ x 4.5″ x 2.5″
  • 9″ x 4.5″ x 3″
W

50% Alumina

  • 12″ x 12″ x 1.5″
  • 12″ x 12″ x 2″
  • 12″ x 12″ x 2.5″
  • 12″ x 24″ x 2.5″
W

60% Alumina

  • 9″ x 4.5″ x 2.5″
  • 9″ x 4.5″ x 3″
W

70% Alumina

  • 9″ x 4.5″ x 2.5″
  • 9″ x 4.5″ x 3″
W

80% Alumina

  • 9″ x 4.5″ x 2.5″
  • 9″ x 4.5″ x 3″
W

Hi-Fire Super Duty

  • 9″ x 4.5″ x 2.5″
  • 9″ x 4.5″ x 3″
W

Insulating 2300°F

  • 9″ x 4.5″ x 2.5″
  • 9″ x 4.5″ x 3″
W

Insulating 2600°F

  • 9″ x 4.5″ x 2.5″
  • 9″ x 4.5″ x 3″
W

Insulating 2800°F

  • 9″ x 4.5″ x 2.5″
  • 9″ x 4.5″ x 3″

Refractory Cement

Refractory castables can be used to create the monolithic linings within all types of furnaces and kilns. They can be further classified into the following sub-categories: conventional, low cement, mortars, plastics and insulating for installation either by gunning or manually. There is a wide variety of raw materials that refractory castables are derived from, including chamotte, andalusite, bauxite, mullite, corundum, tabular alumina, silicon carbide, and both perlite and vermiculite can be used for insulation purposes. There are many refractory cements and similar products; cement, mortar, and plastic. Whether for a crack or for a full wall, we have the product in the size you need. If you are unsure about which type of product to use, contact us for more information.

W

Conventional Castables

  • Heatcrete 24ES
  • Heatcrete 24ESC
  • Heatcrete 25QF
  • Heatcrete 26ES
  • Heatcrete 27QF
  • Super Heatcrete 28QF
  • Super Heatcrete 30QF
  • Super Heatcrete 32QF
  • Super Heatcrete 33QF
W

Gun Mix Castables

  • Super Heatcrete 28QF GM
  • Super Heatcrete 30QF GM
  • Super Heatcrete 32QF GM
  • Super Heatcrete 33QF GM
W

Insulating Castables

  • Delta T Crete 25/25QF
  • Delta T Crete 26M
  • Delta T Crete 28QF GM
  • Delta T Crete 30
  • Delta T Crete 20-35
  • Delta T Crete Block Mix
W

Low Cement Castables

  • Ultratek 60
  • Ultratek 60AL/ALK
  • Ultratek 70UL
  • Ultratek 87UL
  • Ultratek 93
W

Mortars

  • Super Hi Mul (Chaudière 15lbs)
  • Super Hi Mul (Chaudière 55lbs)
  • Super Hi Mul 40 (Chaudière 55lbs)
  • Mortier Hydrofuge (Sac 50lbs)
  • Savage Bond 85
  • Savage Bond 90
W

Plastics

  • Savage RAM 70AS QF
  • Savage RAM 70M Bleu
  • Savage RAM 80AS QF
  • Savage RAM 85
  • Savage RAM 85T
  • Savage RAM 90

Ceramic Fiber Boards and Blanket

Ceramic panels and wool are designed to insolate doors and walls inside heating equipment, ovens, incinerator and more. They are fire-resistant and can resist extreme temperatures. Ideal for domestic and commercial furnaces, as well as for industrial boiler doors, wood burning ovens, fireplaces and masonry heaters.

They are also used to insolate mansory heaters and wood burning ovens. Many dimensions and quality are available for all needs.

W

Ceramic Wool

  • 0.5″ 4lbs
  • 0.5″ 6lbs
  • 0.5″ 8
  • 1″ 4lbs
  • 1″ 6lbs
  • 1″ 8lbs
  • 1.5″ 4lbs
  • 1.5″ 8lbs
  • 2″ 4lbs
  • 2″ 6lbs
  • 2″ 8lbs
W

Ceramic Panels

  • 0.5″ x 24″ x 36″
  • 0.5″ x 24″ x 48″
  • 0.5″ x 42″ x 48″ (ES350)
  • 1″ x 24″ x 36″
  • 1″ x 24″ x 48″
  • 1.5″ x 24″ x 48″
  • 2″ x 24″ x 36″
  • 2″ x 24″ x 48″
W

Ceramic Panels 1900°F

  • 1.0″ x 12″ x 36″
  • 1.5″ x 12″ x 36″
  • 2.0″ x 12″ x 36″

Dense Castables

 

Product Required Water Qty per 100 lbs of Cement
Heatcrete 23 1 ¾ Gal.
Heatcrete 25 1 ¾ Gal.
Heatcrete 27 1 ¾ Gal.
Super Heatcrete 28 1 ¾ Gal.
Super Heatcrete 29 1 ⅓ Gal.
Super Heatcrete 30 1 ⅓ Gal.
Super Heatcrete 32 1 ⅛ Gal.
Super Heatcrete 33 1 ⅛ Gal.
Heatcrete 12 2 Gal.
Heatcrete 22 ES 1 ¾ Gal.
Heatcrete 24 ES 1 ¾ Gal.
Heatcrete 24 ESC 1 ½ Gal.
Heatcrete 26 ES 1 ½ Gal.
Heatcrete 26 ESC 1 ½ Gal.
Super Heatcrete 28-C 1 ⅓ Gal.
Super Heatcrete 28-A 1 ⅛ Gal.
Savage ES 1 ¾ Gal.
Savage 3000 1 ⅛ Gal.

Insulating Castables

 

Product Required Water Qty per 100lbs of Cement
Delta T Crete Block Mix 21 Gal.
Delta T Crete 18 8 ½ Gal.
Delta T Crete 20 7 ½ Gal.
Delta T Crete 20-LI 11 ½ Gal.
Delta T Crete 20-M 4 ¼ Gal.
Delta T Crete 22 5 ¼ Gal.
Delta T Crete 22-LI 8 ¼ Gal.
Delta T Crete 23-M 3 ½ Gal.
Delta T Crete 26-LI 6 ½ Gal.
Delta T Crete 26-M 3 ½ Gal.
Delta T Crete 28 3 Gal.
Delta T Crete 30 3 Gal.
Delta T Crete 33 2 ¾ Gal.